Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
1～12 item / All 12 items
Turbidity meter
The completely waterproof IP67 compatible handheld digital turbidity meter MI1N-100M is easy to operate and, despite its compact size, offers high precision comparable to laboratory turbidity meters. It can measure in a range of 0 to 1000 NTU with a 3-range switch. The MI1N-100M uses polystyrene latex as the calibration standard solution, so NTU = polystyrene turbidity.
It is a high-precision, high-resolution turbidity meter.
The MI1L561-MK complies with EN ISO 7027. It has a built-in clock function that can store up to 1000 measurement data along with the measurement date and time, and it is capable of transferring data to a computer via an RS232 port.
The turbidity meter MI1B-322IR-MK is an easy-to-use turbidity meter with automatic zero correction.
The turbidity meter MI1B-322IR-MK is an easy-to-use turbidity meter with automatic zero correction. It can measure in a range of 0.01 to 1,100 NTU with a 3-range switch. Polystyrene latex is used as the calibration standard solution, so NTU equals polystyrene turbidity. It employs an infrared light source and uses a 90° transmitted scattered light method, allowing measurements to be taken in about 8 seconds. The main unit and turbidity standard solution will be delivered in a hard case.
Calibration with PSL standard solution is possible! The dehumidification function inside the instrument suppresses the occurrence of fogging on optical components!
The "TU5300sc" is a turbidity meter that has developed the knowledge and technology of HACH Corporation's turbidity measurement accumulated since 1957, adopting a new measurement method. It employs a unique measurement method that focuses on light scattered at 90° from the vial's side (360° around) in response to incident light from the bottom of the vial. It can accommodate a wide range of sample waters. 【Features】 - Adopts a comparative turbidity method that focuses on light scattered at 90° from the vial's side (360° around) in response to incident light from the bottom of the vial. - Calibration with PSL standard solution is possible. - The dehumidification function inside the instrument helps prevent fogging of optical components. - Automatic cleaning of the vial is possible with an optional automatic cleaning module. *For more details, please refer to the PDF document or feel free to contact us.
High-precision turbidity measurement is possible in laboratories and similar environments! Reliable transmission type!
While maintaining ease of use and performance, the main unit has been miniaturized, making the 3-channel type lighter.
Directly immerse it on-site to measure turbidity in real time!
The measurement range is 0 to 500 mg/l, and there are types with cable lengths of 10m and 30m. There is also a high concentration type with a measurement range of 200 to 2,000 mg/l.
This is a turbidity meter using an integrating sphere scattering light method. The collected sample water is placed in a dedicated cell for measurement.
***Features*** In the analysis of wastewater quality, the measurement of SS (suspended solids) is considered important alongside BOD and COD. Traditional hand analysis for SS measurement is time-consuming, prone to individual errors, and complicated in operation. This device can measure SS quickly, easily, and with high precision, displaying results digitally. The measurement of suspended solids (SS) using an integrating sphere scattering photometry method is a direct method that does not require the filtration, heating, and weight measurement operations needed in the weight method (JIS method). It can measure both SS and turbidity with a single device. There is no need for complicated operations, and it allows for a wide range (2 range switching) of SS measurements. Since it uses an integrating sphere method, it is not affected by the color of the sample. The amount of sample required for measurement is small. It is easy to operate and compact. It is compatible with both AC and DC, and comes with a charger that includes an AC adapter. It also includes a portable case for convenient transport.
Realizing simple turbidity measurement in the field with immersion-type sensors.
■Features ●Improved reliability in low concentration range The repeatability in the low measurement range has significantly improved to ±0.5 NTU compared to our conventional products. ●Power-saving design It can continuously measure for approximately 120 hours using two AA alkaline batteries. ●Easy monitoring with immersion measurement The sensor can be directly immersed in the sample water for measurement. It can be used for turbidity monitoring over a short period (within 24 hours). *This sensor does not have a cleaning function. Continuous measurement may be limited depending on water quality and usage conditions. *Continuous measurement at depths of 10 meters or more is not recommended. ●Memory function for 1000 data points Automatic memory at regular intervals is also possible. *Short interval memory function: 1 second to 99 minutes 59 seconds or Long interval memory function: 2 minutes to 99 hours 59 minutes (In the long interval memory function, the power will be OFF (sleep mode) after one minute of measurement until the next measurement.) ●Excellent expandability (Connectable to computers, external printers, recorders, etc.) We provide dedicated data collection software to import measurement data into a computer in text format.
The turbidity meter MI1P-526M is an easy-to-operate turbidity meter that supports measurements in the range of 0.01 to 1,000 FNU, thanks to its automatic calibration solution recognition correction.
The turbidity meter MI1P-526M is an easy-to-use device that supports measurements in the range of 0.01 to 1,000 FNU, thanks to its automatic calibration solution recognition correction. It uses a high-emission infrared LED as the light source and performs accurate measurements in about 8 seconds using a 90° transmitted scattered light method.
Measure the collected water sample in a dedicated cell!
Integrating sphere scattering light turbidity meter
Surface scattered light method! Available in single range, dual range, and triple range specifications for water measurement instruments.
The "TUF-1600 model" is a turbidity meter that can be widely used for measuring turbidity in various applications, including the measurement of turbidity in process water during drinking water treatment, treated water from sewage and drainage, as well as environmental water measurements in rivers and lakes. The measurement method is based on surface scattering light, where the light source and receiving part do not come into contact with the sample water, preventing any influence from dirt on the cell window, allowing for stable measurements over a long period. 【Features】 ■ Available in single-range, dual-range, and triple-range specifications ■ Uses long-life LED (white) as the light source ■ Sample water flow rate is half that of conventional models ■ Compatible with Modbus communication systems ■ Supports a variety of installation methods *For more details, please download the PDF or contact us.
High-precision measurement of a range from 0.01 to 4000 NTU with new technology.
■New Technology ◇90-Degree Multi-Pass Turbidity Detection Technology This is a patented technology unique to Lovibond, which installs two detectors at a 90-degree angle to the light source. By automatically switching between the two detectors, it consistently provides reliable results regardless of particle size or shape. ◇BLAC Technology This is a new technology that removes stray light through a light absorption trap. It can measure with extreme accuracy even at low turbidity levels of 0.01 NTU.
